Modify Selection
- Mining types and methods:
- Underground mining
- or
- Auger mining
- or
- Leaching
- or
- Cut and fill stoping
- or
- Caving
- or
- Block caving
- or
- Hydraulic mining
- or
- Drift mining
- or
- Longwall mining
- or
- Multiple seam mining
- or
- Overmining
- or
- Undermining
- or
- Water jet mining
- or
- Low seam mining
- or
- Hydraulic backfill
- or
- Room and pillar mining
- or
- Retreat mining
- or
- Extended cut mining
- or
- Continuous mining
Home Links
Results 51 - 60 of 403
-
12/1/2007 - Unpublished documents and reportsThis final report was prepared by the Technical Study Panel on the Utilization of Belt Air and the Composition and Fire Retardant Properties of Belt Materials in Underground Coal Mining. It provides a review and recommendations concerning the utilizatio...
-
7/1/2007 - Technology NewsThe International Workshop on Rock Mass Classification in Underground Mining provided a forum for leading practitioners of rock mass classification from around the world to come together and share their methods and experiences with the technique.
-
5/1/2007 - Information CircularsThe goal of the workshop was to allow leading practitioners of rock mass classification to share their experiences with the technique. The proceedings contain 16 papers from 9 countries. Applications in both hard-rock and coal mining are represented.
-
2/1/2007 - Peer reviewed journal articlesThis paper describes three mechanical methods - the mobile manipulator, the in-mine hoist, and a cable-handling system - developed by NIOSH to reduce injuries related to handling supplies or material, loading and unloading, and moving power cables.
-
2/1/2007 - Peer reviewed journal articlesA study of ground behavior, reinforcement performance and stress redistribution looked at a longwall tailgate under severe horizontal stress. Comparison to field results showed that a FLAC-2D model captured the significant roof and support behavior.
-
12/1/2006 - Conference papersThis paper presents a method using a ray-tracing technique to determine absorption coefficients for underground mines. Absorption coefficients are determined and presented for octave bands from 63 Hz to 8 kHz.
-
9/1/2006 - Peer reviewed journal articlesUS coal mining organizations are losing the knowledge they need to be able to respond to emergencies. Knowledge management provides a useful perspective from which to view the problem. Knowledge can be managed by cultivating it through narratives.
-
6/1/2006 - Conference papersNIOSH conducted a study with the goal of characterizing methane emissions from increasing face lengths in the Pittsburgh Coalbed and providing a method of predicting emissions increases from longer faces and of planning for more methane control.
-
6/1/2006 - Conference papersNIOSH conducted a longwall methane emission and mining time study at a Pittsburgh Coalbed mine to predict emissions from a longer face, and developed and applied mathematical formulas and constants to characterize four emission contributors.
-
5/1/2006 - Reports of InvestigationsAn underground metal mine study assessed the effects of diesel emissions control technologies (such as DPF systems, diesel oxidation catalytic converter, and biodiesel blends) on concentrations of diesel particulate matter and gases in mine air.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program